How to Fix Chipped Marble Counter – Easy Guide

If you’re here, you might be looking for simple steps to fix chipped marble. Is that right? Great. Chipped marble countertops are common issues in houses, particularly when used frequently. 

Whether heavy pots or sharp utensils cause damage, the chipped part spoils the countertops’ overall beauty. So, it is important to address the issue immediately. 

However, you don’t always need a professional to repair the chipped marble. You can easily fix the damage with the right tools and techniques. Read the following sections to restore the aesthetic appeal of the marble countertops once again. 

Material Needed for Fixing Chipped Marble

So, you’re worried about how to fix the chipped marble, aren’t you? No problem. Just collect these materials, and let’s fix the chipped marble countertops together. 

Essential Tools for Fixing Chipped Marble 

1. A milling tool to smooth the chipped area. It flattens the chipped surface, which promotes better adhesion of the filler material. 

2. Purchase a filler material; you can choose high-quality and specifically designed epoxy or resin. 

3. You need to buy colouring pigments so the marble will not look like it was previously repaired. Select the same colour as your countertops. 

4. A dispenser or applicator to fill the chip with epoxy or resin. 

5. Buy a flat surface mould to maintain the same level as the surrounding marble. 

On the other side, there are many marble repair kits available on the market; you can purchase them online or in stores. In these readymade kits, you’ll get almost everything you need. 

Steps to Fix the Chipped Marble Countertop

Now, you have everything to repair the chipped marble countertops. Let’s fix it. 

Steps to Fix the Marble Countertops with a Chipped Piece 

• Keep the chipped piece safe and accessible before initiating repair.

• Clean the area with a gentle cleaner, wipe it with a microfiber cloth, and let it dry. This helps to remove debris or dirt.  

• Apply adhesive; you can use epoxy glue or repair cement on the edges of the chipped piece and countertop areas. 

• Press and hold the chipped part with the damaged area; it’s better to wear a glove while performing this activity. 

• Fill the gaps with a colour pigment that matches the marble colour.

• Smooth the repaired area and level it the same as the surroundings. 

• Let it sit for some time. Once it dries, you can gently rub the rough edges and polish the repaired spot. 

So far, you have learned about how to fix the marble with a chipped part. But what if you don’t have that chipped part? Here are the steps; take a glance. 

Steps to Fix the Marble Countertops without a Chipped Piece 

• Clean the area with a soft cloth and a gentle cleaner to remove the debris and dust.

• You can use coloured paste or epoxy to fill the gaps in chipped parts. If you use epoxy, make sure you mix it until it has a paste-like texture. 

• Now, place the paste into the syringe and position the mould over the chipped area of the marble slabs. 

• Fill the paste into the damaged area and let it dry for one night. 

• Finally, use a milling tool or sandpaper to smoothen the surface and complete the repair. 

How to Prevent Damage to Marble Countertops?

Countertops are vital components of both residential and commercial buildings. They significantly impact the aesthetics and functionality of any building. 

In that case, even a small scratch on the marble countertops can spoil the beauty of the rooms. Utilise these tips to maintain the marble.   

Handle with Care 

Maintaining marble is an art, so be a Picasso of it. Address every stain immediately; use a mild, pH-neutral cleaner and a soft, damp cloth. 

Try to clean the countertops before you start any work and repeat the same once your work is completed. Following it properly helps to avoid colour dullness and stain formation. 

Use Cutting Boards, Trivets, and Coasters 

If you frequently use marble countertops to serve hot dishes or a hot cup of coffee, then it’s better to use trivets and coasters.  

On the other hand, you can use boards to cut veggies or meat to cook any dish instead of cutting directly on the countertop. 

Following this helps you to maintain the same texture and shine of the marble even after years. 

Sealant is Must 

Applying a sealant protects your investment. Yes, sealing marble surfaces acts as a protective barrier, repelling oil, water, and other staining agents from penetrating the surface. 

To get started, purchase the best quality sealer from the store and clean the overall countertop. Particularly, mask off the stove if it is attached to the countertops. Apply the first layer of sealant and use a soft foam brush to spread it over the corners and edges. 

Let the first layer sit for some time, and then apply the second coat of sealer. Wait one night for the surface to dry, then use a soft cloth to wipe the countertop. Now, the countertop’s protective layer is all set to use. 

Find the Right Way to Clean the Stains

Here are some simple yet notable tips provided to clean the marble countertops effectively. Follow these steps to ensure your countertops stay spotless and well-protected:

Organic Stains 

You can use baking soda to remove organic stains, such as those from spilling food, tea, or other beverages. Mix baking soda with water to make a paste and apply it over the spills. Then, scrub the area gently using a soft cloth and rinse thoroughly. 

Etching and Water Stains 

You can use marble polishing power to remove stains caused by water settlement and acidic substances. Follow the instructions on the package, use proper equipment, and wipe the surface gently with a soft cloth once the process is completed. 

Things to Avoid 

Similar to focusing on the right things, you must be aware of the things not to do. Learn about the don’ts here and stop doing them if you’re following any so far. 

• Avoid contact with acidic food items like vinegar, citrus fruits, coffee, tomato sauce, and wine. 

• Don’t procrastinate; addressing issues immediately reduces the chances of stains settling down. 

• Avoid cleaners containing harsh chemicals like bleach, ammonia, or abrasives. Instead, choose pH-neutral cleaners exclusively designed for cleaning marble. 

• Stop placing objects in excessive weight and temperature because these can cause scratches and cracks over time. 

• Never neglect regular maintenance. Fix a schedule or add it to a to-do list for the timely cleaning of marble countertops. 

Conclusion

Hope this article helps you fix the damage yourself. Follow these steps effectively to restore the beauty of your home. If you’re not confident enough, consider hiring a professional to get better outcomes. Plus, make sure you follow the proper care tips to keep marble countertops looking as new as ever.  

FAQs